These services are supported with a technical engineering report of your pond's condition. This detailed documentation highlights every salient pre-condition found at the time of the initial visit, and recommends solutions with an estimate for resolving each item.

New Customer On-Site Analysis

• Laboratory-Grade Microscopic Analysis (selective) 
• Laboratory-Grade Test Equipment- Test pond's water parameters including PH, all Chorines, Nitrites, Nitrates, Bacteria Ammonia Processing, Ammonia, Dissolved Oxygen, Salinity, just to name a few.
• Analyze and check aeration system
• Survey water flow circulation, and waste removal (drains) processes
• Engineering/Medical Report Provided
• Make emergency adjustments to any accessible components of the mechanical system
• Visually evaluate fish health
• Customer education
• 3 Hours included for Pond Analysis Report (.PDF)
• 2 Hours included for total travel time to site (Farther customer-site distances may incur additional charges)
• 2 Hours included for on-site engineering labor

FLAT RATE- $ 210.00

Basic Maintenance Program- (Mechanical and Health)

• Laboratory-Grade Microscopic Analysis (selective analysis) 
• Laboratory-Grade Test Equipment- Test pond's water parameters including PH, all Chorines, Nitrites, Nitrates, Bacteria Ammonia Processing, Ammonia, Dissolved Oxygen, Salinity, just to name a few.
• Inspect and adjust filtration system
• Analyze and check aeration system
• Survey water flow circulation, and waste removal (drains) processes
• Check UV light operation
• On-Site labor included
• Travel time costs to customer site will vary

$ 115.00 /visit

Complete Maintenance Program- (Mechanical and Health)

• Laboratory-Grade Microscopic Analysis of sick Koi 
• Laboratory-Grade Test Equipment- Test pond's water parameters including PH, all Chorines, Nitrites, Nitrates, Bacteria Ammonia Processing, Ammonia, Dissolved Oxygen, Salinity, just to name a few.
• Water Flow Rates and validation of pump pressures/outputs using custom Electronic Flow-Meter Manifold.
• Inspect and adjust filtration system
• Analyze and check aeration system
• Survey water flow circulation, and waste removal (drains) processes
• Check UV light output and adjust water flow-rate using custom Electronic Flow-Meter Manifold and Light Meter.
• Engineering Report Provided
• On-site labor included
• Travel time costs to customer site will vary

FLAT RATE- $ 186.00 /visit 

Existing diseased pond-

• Laboratory-Grade Microscopic Analysis- Koi 
• Laboratory-Grade Test Equipment- Test and adjust all of your new pond's water parameters including PH, all Chorines, Nitrites, Nitrates, Bacteria Ammonia Processing, Ammonia, Dissolved Oxygen, Salinity, just to name a few.
• Selective microscopic fish sampling
• Filtration efficiency check
• UV light output efficiency check
• All needed treatments
• On-site Training to store employees, or residential/commercial Koi Owners
• On-site emergency pond heater (Winter)
• On-Site Quarantine Tank and Supplies installed
• Engineering/Medical Report Provided

$ Estimate will be given

Customer would be required to provide an area for pond sediment and excess pond water (e.g. flower bed) in close proximity to the pond.  Electrical services and fresh water connection will be required. This service sometimes requires 1-2 days to complete.

• Transfer of aquatic life to temporary environment
• Complete draining of pond
• Power cleaning of pond interior surface (rocks will prevent complete cleaning process)
• Removal of sludge and debris
• Refill pond to normal levels and treat with chemicals
• Test water parameters for safe transfer of aquatic life
• Transfer of all aquatic life into new pond water
• Continued testing of water and monitoring of fish health
• Draining and disinfection of temporary environment vessels
• On-site labor for cleaning
• Chemical required for water treatment
• Travel time

Starting at - $ 300.00

$65.00/hr.  Mechanical/Repair Work

$83.00/hr.  Medical Treatment w/microscope